axials造句

• Angular momentum is an axial vector quantity .
  角动量是一种轴矢量。
• An axial vector may itself enter into a vector product .
  轴矢量自身可参与矢积。
• However, there are two possible axial directions .
  不过，沿着轴线也还有两种可能的方向。
• Neglect the axial deformations and consider only the lumped masses .
  略去轴向变形不计，仅考虑集中质量。
• A trigonal bipyramid has three equatorial and two axial positions .
  一个三角双锥体有三个赤道位和两个轴向位。
• Those that are aligned perpendicular to the plane are called axial hydrogens .
  与平面垂直定向的氢叫做直立氢。
• An axial electron pair meets at right angles with 3 neighboring pairs .
  轴向电子对与三个相邻的电子对相交成直角。
• Polar vectors and axial vectors are distinguished by their inversion properties .
  极矢量与轴矢量的区别在于它们的反演性质不同。
• In general, the deformation of the model grille is a combination of axial and shear strains .
  一般情况下，模型栅格的变形是轴向应变和切向应变的组合。
• The east pacific rise, west of south america, has a high separation rate but no axial rift .
  南美西部东太平洋洋隆具有高的分离速率，但是没有轴部裂谷。
• The most important of the results is the finding of significant axial variations of the combustion parameters .
  最重要的结果是燃烧参数的轴向变化显著。
• In contrast, the axial beam continues to build as it bounces back and forth across the active medium .
  相反，轴向光束则随着往复穿过激活媒质而不断加强。
• The tank location for these vehicles is chosen for optimum airframe design for axial loads .
  这些飞行器上的油箱位置是相对轴向载荷作最佳结构设计来选择的。
• The condition of uniaxial stress is closely approximated in prismatic bars subjected to pure axial tensile .
  单轴的应力状态跟棱柱杆承受单纯轴向拉伸十分近似。
• The axial and lateral spread of fluid has been likened to and accounted for by a diffusion-type model .
  流体在轴向和径向的散布，已与一个扩散模型联系起来并用后者加以说明。
• Also, two unique injector types, representing departures from the conventional axial injection scheme, are also discussed .
  此外，还讨论了两种独特的喷注器型式，这些型式不同于常规的轴向喷射方式。
• Because of their efficiency, compactness, and simplicity of installation, axial flow fans have become increasingly used in recent years .
  由于它们效率高，体积小，装配简易，轴流式通风机近些年来使用得越来越多了。
• If shear, torsional and axial deformations are to be taken into account, their effects must be added into the expression for internal work .
  在计算中若考虑剪切、扭转及轴向变形，则其影响应该迭加到内虚乘积功的表达式中。
• Basically, neglecting axial deformations corresponds to the omission of rows 1 and 4 and columns 1 and 4 of the stiffness matrix equation(15. 1) .
  忽略不计轴向变形基本上可以说相当于删去方程（15-1）中刚度矩阵的第1行和第4行及第1列和第4列。
• Test method of ferrocement panels in axial tension
  钢丝网水泥板轴心受拉试验方法