锁紧环的英文

• binding ring
• circlip
• lock ring
• locking ring
• securing ring

• 锁紧    locking; drop lock
• 环    ring; hoop
• 弹性锁紧环    circlip
• 锥形锁紧环    taper lock ring
• 锥形锁紧环组件    taper lock ring set
• 锁紧    [机械工程] locking; drop lock 自锁紧 self-locking; 锁紧垫圈 lock washer; 锁紧件 retaining member; 锁紧接头 lock-on connection; 锁紧螺钉 lock-screw; 锁紧螺帽 cage nut; 锁紧螺母 jam nut; lock nut; latch nut; pinch nut; retaining nut; 锁紧螺栓 lock bolt; 锁紧器 locker; 锁紧装置 lock device
• 夹紧环    champing collar; clamp ring; clamping ring
• 加紧环    clamring
• 卡紧环    bail wire
• 拉紧环    tensioning ring
• 松紧环    loose collar; loosecollar
• 缩紧环    shrink ring
• 销紧环    binding ring; end ring
• 压紧环    clamp ring; hold-down ring; thrust-race
• 套管压紧环    casing hold-down ring
• 填料压紧环    packing follower
• 自动扣紧环    self-gripping ring
• 带固紧环喷嘴    eyelet nozzle
• 锁紧板    locking plate
• 锁紧柄    locking bar
• 锁紧阀    lock valve; locking valve
• 锁紧杆    check lock lever; lock lever yoke; locking bar; locking lever
• 锁紧簧    lock spring
• 锁紧键    captive key; locking key
• 锁紧件    locking piece; retaining member

• Fabricating procedure of the thread lock heat exchanger
  螺纹锁紧环式换热器制造工艺
• . pn 6 plastics - half symmetric fitting guillemin system with locking ring . nominal pressure pn 6
  带锁紧环的半对称配件
• Aerospace series - pipe coupling 8 30 ' in titanium alloy - blanking plug with lockring
  航空航天系列. 8 30 '钛合金管连接件.带锁紧环的截止管塞
• Aerospace series - pipe coupling 8 o30 ' in titanium alloy - blanking plugs with lockring
  航空航天系列. 8 30 '钛合金联管节.带锁紧环的管子堵塞
• Aerospace series - pipe coupling 8 30 in titanium alloy - adaptors with lockring ; german and english version en 3566 : 2001 ac : 2003
  航空航天系列.钛合金管连接件8 30 ' .带锁紧环的接头
• Aerospace series - pipe coupling 8 30 in titanium alloy - blanking plugs with lockring ; german and english version en 3270 : 2001 ac : 2003
  航空航天系列. 8 30 '钛合金管连接件.带锁紧环的堵塞
• Aerospace series - pipe coupling 8 30 ' in titanium alloy - adapters , reduced pipe end , with locking ring ; german and english version en 3248 : 2001
  航空航天系列.钛合金管联接器8 30 ’ .带锁紧环的缩径
• The fabricating procedure and quality control for thread lock heat exchanger were introduced . the quality of heat exchanger is satisfactory
  摘要主要论述了螺纹锁紧环式换热器的制造工艺及质量控制方法，按此工艺和控制方法制造的换热器质量优良，水压试验一次成功。

• 锁紧环的法语：anneau de buté
• 锁紧环的日语：せいげんリング クリップリング チェツクリング