Iron and steel - method for x - ray fluorescence spectrometric analysis 钢铁. x射线荧光光谱分析法
Methods for x - ray fluorescence spectrometric analysis of refractory products 耐火制品x射线荧光光谱分析法
Discussion on the detection limit in x - ray fluorescence spectrometic analysis 射线荧光光谱分析检出限问题的探讨与建议
Aluminium fluoride for industrial use - determination of sulphur content - x - ray fluorescence spectrometric method 工业用氟化铝中硫量的测定x射线荧光光谱分析法
Guidelines for the preparation of standard routine methods with wavelength - dispersive x - ray fluorescence spectrometry 波长散射性x射线荧光光谱分析的标准常规用法的制定指南
Advanced technical ceramics . methods of test for ceramic powders . determination of oxygen content in aluminium nitride by xrf analysis 高技术陶瓷.陶瓷粉末试验方法.用x射线荧光光谱分析法对氮化铝氧含量的测定
Finally , the angular dependence of the top layer fluorescence intensity was investigated when varying the thickness of the top layer . the experimental results are good agreement with the theoretical calculations 实验结果和理论计算符合得很好,这表明掠出射x射线荧光光谱分析技术完全可以用来分析薄膜厚度等特性。
This demonstrates the feasibility of using grazing emission x - ray fluorescence spectroscopy as a method of studying the thin layer ' s characteristics , such as composition and thickiness etc . with the intimately combining of theoretical , set - up and experimental research , the study on the analysis techniques of grazing emission x - ray fluorescence is developed , and the first set of grazing emission x - ray fluorescence setup is established . at the same time , the angular dependence of the fluorescence intensity with different thickness layer is measured . all the work in this thesis provides the basis for the further researches 本论文采用理论、装置和实验研究密切结合的方式,开展了掠射x射线荧光分析技术研究工作,在国内建立了首台掠出射x射线荧光光谱分析装置,并对不同厚度单层和双层薄膜样品在掠出射条件下产生的荧光光强与掠射角的对应博士学位论文:掠射x射线荧光分析技术研究关系进行了实验测定。