Recrystallization kinetics of the galvanized strip continuous annealing process with acceleration 热镀锌原板变速连续退火再结晶动力学
Effect of microstructure and recrystallization and mechanical properties of two - phase ti alloy 两相钛合金再结晶百分数和力学性能的影响
Effects of electric current pulse on the dynamics of dynamic recrystallization in 2091 al - li alloy 脉中电流对2091铝锂合金动态再结晶动力学的影响
Dynamic recovery and dynamic recrystallization phenomenon of the alloy have also been discussed )和温度t的相关性以及动态回复和动态再结晶行为等。
Recrystallization begins after annealing at 433k for 60 min , and then the vcikers hardness decreases Ecap十道次后的组织在433k左右发生再结晶,硬度随之下降。
At the same velocity , the dynamic recrystallization phenomenon is rather distinct with the rise of temperature 在相同的速度下,随着温度的升高,动态再结晶现象比较明显。
For a particular alloy , the minimum temperature at which complete recrystallization will occur within approximately one hour 对于某种合金,在大约一小时的时间里,完成再结晶所需的最低温度
The increase in hardness and strength of a ductile metal as it is plastically deformed below its recrystallization temperature 塑性材料于再结晶温度以下进行塑性变形引起的硬度和强度升高现象。
The semi - solid recrystallization velocity was run - up when the holding temperature risen and the heating velocity accelerated . 5 保温温度升高和连续加热速度加诀都会使半固态再结晶的速度提高。
Moving from single dislocations to ensemble effects , recovery and polygonization are reviewed . recrystallization is also introduced and described phenomenologically 由单一差排进而转往整体效应,并回顾回复及多角形化。亦由现象面介绍及描述再结晶。