涂层面的英文

• side of coating

• 涂:    spread on; apply; smear
• 涂层面料:    coated fabrics
• 层面:    bed plane; bedded plane; bedding planes; bedding surface; beddingplane; deck; floor; plane of bedding; statification plane; stratificatio lane; stratification plane
• 涂层:    paint-coat; paintcoat; coat; coating; covering; lining; wrapping flux 减磨涂层 friction coat; 反雷达涂层 antiradar coating; 涂层材料 enamel; 涂层磁带 coated magnetic tape; 涂层装置 plater
• 垫层面 顺层面 层理面 层面:    beddingplane

例句与用法

1. The measurement method of current - cut - off potential and resistivity of coating surface
   断电电位和涂层面电阻率测试方法
2. Rubber - or plastics - coated fabrics - determination of roll characteristics - methods for determination of total mass per unit area , mass per unit area of coating and mass per unit area of substrate
   橡胶或塑料涂覆织物.卷料参数的测定.涂料单位面积总质量单位涂层面积的质量和基体单位面积质量的测定方法
3. 3 . the gap defects in multilayer cvd sic coatings could be effectively controlled by means of slow deposition in low - pressure chemical vapor deposition ( lpcvd ) . 2d c / sic composites with a multi - layer cvd sic coating prepared by slow lpcvd showed weight gain at 1300 @ in air condition
   ( 3 )采用慢速减压化学气相沉积工艺实现了对多层cvdsic涂层面缺陷的有效控制，实现了单一cvdsic涂层保护2dc sic在高温下( 1300 )的氧化增重。
4. Ground on the knowledge of the form mechanisms of the coating defects , the research work proposed some thoughts related to preparation / deposition process to control the coating defects . based on observation of micro - morphologies of the coatings , combined with relative weight change in oxidation , the effects of these modifications on coating defects control and the behaviors of 2d c / sic at constant temperatures in air condition were investigated . the main contents and conclusions are as follows : 1
   本文从多层cvdsic涂层缺陷形成的根源出发，通过涂层制备工艺进行涂层缺陷控制；以对涂层显微形貌的观察为基础，结合氧化重量变化率，研究了不同涂层改性工艺对多层cvdsic涂层面缺陷的影响以及对2dc sic复合材料恒温氧化行为的影响，主要研究内容与研究结果如下： ( 1 )研究了多层cvdsic涂层的2d和3dc sic复合材料在空气中的恒温氧化行为，表明2d和3dsic ? c sic在空气中表现出类似的氧化动力学行为。